The numerical control unit is equipped with the “B00†series. First, the visibility of the display device is improved for the convenience of the operator. In the past, 10.4-inch monochrome LCD panels have been used, and now they are replaced by 12.1-inch large color panels.
At the same time, in order to improve production efficiency, the B00 series will increase the number of axes that can be simultaneously controlled from the last three to four. Therefore, it is possible to simultaneously control the X, Y, and Z axes on the spindle side of the turret and the indexing axis on the side of the table on which the workpiece is fixed, for a total of four axes. This makes it possible to cut a more complex shape like the 4-axis control MC (Note: Although the device can control up to 5 axes, it can control up to 4 axes at the same time. In addition, the table side is indexed. Up to 2 axes can be installed).
In terms of productivity improvement, the production cycle time is also shortened. While shortening the rise and fall times of the spindle, the non-cutting time is shortened by 7% by developing a time constant that can set the optimum rapid feed according to the weight of the workpiece placed on the console.
In addition to this, it also expands the space of the processing room. By moving the machine tool column that was in the processing chamber in the depth direction of the machine tool body and changing the film-shaped Z-axis cover (film cover) into a plate-like cover, the space in the depth direction is enlarged by about 150 mm. Therefore, the processing chamber can be expanded up to 1500 × X axis direction 1020 × Z axis direction 480 mm in the X-axis direction, and is 43% larger than the past in terms of volume. Not only does the freedom of the fixture used increase, but more workpieces can be cut.
At the same time, the coolant spray method called "ChipShower" was also improved. A flexible nozzle that can flexibly adjust the direction of the nozzle is used to spray the coolant from a higher position inside the processing portion like a shower. Improve the discharge performance of the chip and improve the production efficiency.
Sodium Lauryl Ether Sulfate (SLES),white or yellowish paste, an anionic Detergent and surfactant found in many personal care products (soaps, shampoos, toothpaste, etc.). SLES is an inexpensive and very effective foaming agent.SLES, sodium lauryl sulfate (SLS), ammonium lauryl sulfate (ALS), and sodium pareth sulfate are surfactants that are used in many cosmetic products for their cleaning and emulsifying properties. They behave similarly to soap. It is derived from palm kernel oil or coconut oil.
Its chemical formula is CH3(CH2)11(OCH2CH2)nOSO3Na. Sometimes the number represented by n is specified in the name, for example laureth-2 sulfate. The product is heterogeneous in the number of ethoxyl groups, where n is the mean. Laureth-3 sulfate is common in commercial products.
SLES is prepared by ethoxylation of dodecyl alcohol, which is produced industrially from palm kernel oil or coconut oil. The resulting ethoxylate is converted to a half ester of sulfuric ACID, which is neutralized by conversion to the sodium salt.[1] The related surfactant sodium lauryl sulfate (also known as sodium dodecyl sulfate or SDS) is produced similarly, but without the ethoxylation step. SLS and ammonium lauryl sulfate (ALS) are commonly used alternatives to SLES in consumer products.
SLES is a kind of anionic surfactant with excellent performance.
It has good cleaning, emulsifying, wetting, densifying and foaming performance,with good solvency, wide compatibility, strong resistance to hard water, high biodegradation, and low irritation to skin and eye.
1.SLES(Sodium Laureth Sulphate) widely used in liquid detergent.; e.g. Shampoo, dishwashing detergent, bubble bath liquid, hand washing etc.
2.If using SLES(Sodium Lauryl Ether Sulfate) to replace LABSA partially, phosphate can be saved or reduced, and general dosage of active matter may be reduced, in washing powder and detergent for heavy dirty.
3.SLES(Sodium Lauryl Ether Sulphate) can be used as lubricant, dyeing agent, cleanser, foaming agent and degreasing agent.; e.g. printing and dyeing industry, petroleum and leather industry.
Lauryl Ether Sulfate,Sodium Lauryl Ether Sulfate,Sodium Laureth Ether Sulfate,Sodium Lauryl Ether Sulfate Detergent
HENAN JINHE INDUSTRY CO.,LTD , https://www.hntitaniumdioxide.com