Features:
1. Complete with computer design, design accurate and reliable.
2. The shell adopts frame structure with high strength, good stability,also can designed by different pressure and temperature requirements.Â
3. The ways of gas in or out can be arranged according to characteristics of the design process into various forms, process layout flexibility.
4. Using the resistance type air flow plus uniform diversion device, the air uniform, and no blocking phenomenon.Â
5. Precipitation using 480C plate board, discharge tube prick using the new RS line, most with the management, discharge uniformity, discharge performance.Â
6. The discharge electrode connected with the framework of the rational, no dropped calls, disconnected situation.Â
7. Lateral torsion arm hammer rapping, rapping uniform and effective force transmission, cleaning easy.
Principle of Working
1:The dust-containing gas enters the dust collector from the air inlet of the ash bucket, through the lower ash bucket enters the filter chamber, and the coarser particles fall into the ash bucket directly . The clean air filtered by the filter bag enters the clean air chamber, and discharged into the atmosphere by the fan.
2:This series uses uninterrupted circulating ash cleaning.When the dust is cleaned, the pulse controller sends a signal to sequentially open each pulse valve, and the compressed air in the air separation bag instantaneously enters the filter bag through the pulse valve to the blowing pipe, and the filter bag expands rapidly, causing the dust layer on the surface of the filter bag to fall off, and the filter bag Resistance is restored.
3:The dust removal device adopts the lower air inlet and the outer filter type, and the cleaning method is pulse jet cleaning, which is simple and convenient to operate, safe and reliable.
Technical parameter
| Capacity   Model | JFMC-32 | JFMC-64 | |||||||
| 32-3 | 32-4 | 32-5 | 32-6 | 64-4 | 64-5 | 64-6 | 64-7 | 64-8 | |
|                                  Air volume (m³/h) | 6900 | 8900 | 11160 | 13390 | 17800 | 22300 | 26700 | 31200 | 35700 |
| Â Â Â Â Â Â Â Â Â Filter area | 93 | 124 | 155 | 186 | 248 | 310 | 372 | 434 | 496 |
| Â Â Â Â Â Â Â Â Â Â Number of dust collector (piece) | 3 | 4 | 5 | 6 | 4 | 5 | 6 | 7 | 8 |
| Â Â Â Â Â Â Â Â Â Number of bags per room (piece) | 32 | 64 | |||||||
| Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Total number of filter bags(piece) | 96 | 128 | 160 | 192 | 256 | 320 | 384 | 448 | 512 |
| Compressed air consumption (Nm³*min) | 0.4 | 0.4 | 0.4 | 0.6 | 0.6(1.2) | ||||
|              Total weight (t) | 2.85 | 4.1 | 5.3 | 6.5 | 8.3 | 9.8 | 11.7 | 13.4 | 15 |
| Capacity   Model | JFMC-128 | ||||||
| 128-2x6 | 128-2x7 | 128-2x8 | 128-2x9 | 128-2x10 | 128-2x11 | 128-2x12 | |
|                                 Air volume (m³/h) | 134600 | 157000 | 179400 | 201900 | 224300 | 247600 | 269100 |
| Â Â Â Â Â Â Â Â Â Filter area | 1869 | 2181 | 2492 | 2084 | 3115 | 3427 | 3738 |
| Â Â Â Â Â Â Â Â Â Â Number of dust collector (piece) | 12 | 14 | 16 | 18 | 20 | 22 | 24 |
| Â Â Â Â Â Â Â Â Â Number of bags per room (piece) | 128 | ||||||
| Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Total number of filter bags(piece) | 1536 | 1792 | 2048 | 2304 | 2560 | 2816 | 3072 |
|  Compressed air consumption (Nm³*min) | 1.6(3.0) | 1.8(3.5) | 2.0(4.0) | ||||
|             Total weight (t) | 43.9 | 52.7 | 60 | 66.5 | 72 | 78.5 | 86.4 |
FAQ:
Q1. Are you a factory or trading company?
We are a manufacturer.We have 1000 sqm modern factory, with 3 production lines. We have 100 factory workers and 10 of them are quality control and engineer guys. Welcome to visit our factory.
Q2. Are your products the lowest price?
We take the quality and competitive price into consideration prior. The price is based on the order quantity. We always offer the high quality level products for buyers and discount is available from us when the order is big.Â
Q3. All products have a warranty?
 Yes, we supply 1 to 2 years warranty for our electric screwdriver and fume extractions. You will be satisfied with our quality.Â
Q4. Can we add our logo on products?
Yes, there are several ways to do this. We can put the label of your logo on the products or make the silk print of your logo on the products when your order reach the required MOQ.
Q5. Can we customize product?
OEM and ODM are welcomed  from Kingsom. We have rich experiences in this area.
Our Services
1. Enquiries quickly reply within 24 hours.
2. After-sales service, rapid response, the engineer installation guide. The feedback problems will be replied within 24 hours. We can arrange professional engineers arrived at equipment location within 48 working hours for problem solved.
3. The dust collector design according to the specific condition of dust removal technology. The wind network project design for all system. To be the optimal structure design.
4. The lowest equipment price whole network in alibaba Welcome to rate of the price. If our price is higher, we will return twice of our quoted price difference to you. Please prompt before sign the contract with us. Due to our good faith principle.Â
5. The bag filter equipment over 20 years working life.
6. Associated with equipment spare parts, ensure the replacement parts within 20 years.
Â
Â
Â
 Bag filter is suitable for refractory processing dust removal, steel making electric furnace flue gas dust removal, abrasive processing workshop dust removal, calcium carbide furnace production dust removal, blast furnace gas purification, pulverized coal preparation dust removal, asphalt concrete production dust removal, carbon black production dust removal, dedusting of building materials, dedusting in the chemical industry, dust removal in electrolytic aluminum processing, dust removal during aluminum and zinc smelting
Features:
1. Complete with computer design, design accurate and reliable.
2. The shell adopts frame structure with high strength, good stability,also can designed by different pressure and temperature requirements.Â
3. The ways of gas in or out can be arranged according to characteristics of the design process into various forms, process layout flexibility.
4. Using the resistance type air flow plus uniform diversion device, the air uniform, and no blocking phenomenon.Â
5. Precipitation using 480C plate board, discharge tube prick using the new RS line, most with the management, discharge uniformity, discharge performance.Â
6. The discharge electrode connected with the framework of the rational, no dropped calls, disconnected situation.Â
7. Lateral torsion arm hammer rapping, rapping uniform and effective force transmission, cleaning easy.
Principle of Working
1:The dust-containing gas enters the dust collector from the air inlet of the ash bucket, through the lower ash bucket enters the filter chamber, and the coarser particles fall into the ash bucket directly . The clean air filtered by the filter bag enters the clean air chamber, and discharged into the atmosphere by the fan.
2:This series uses uninterrupted circulating ash cleaning.When the dust is cleaned, the pulse controller sends a signal to sequentially open each pulse valve, and the compressed air in the air separation bag instantaneously enters the filter bag through the pulse valve to the blowing pipe, and the filter bag expands rapidly, causing the dust layer on the surface of the filter bag to fall off, and the filter bag Resistance is restored.
3:The dust removal device adopts the lower air inlet and the outer filter type, and the cleaning method is pulse jet cleaning, which is simple and convenient to operate, safe and reliable.
Technical parameter
| Capacity   Model | JFMC-32 | JFMC-64 | |||||||
| 32-3 | 32-4 | 32-5 | 32-6 | 64-4 | 64-5 | 64-6 | 64-7 | 64-8 | |
|                                  Air volume (m³/h) | 6900 | 8900 | 11160 | 13390 | 17800 | 22300 | 26700 | 31200 | 35700 |
| Â Â Â Â Â Â Â Â Â Filter area | 93 | 124 | 155 | 186 | 248 | 310 | 372 | 434 | 496 |
| Â Â Â Â Â Â Â Â Â Â Number of dust collector (piece) | 3 | 4 | 5 | 6 | 4 | 5 | 6 | 7 | 8 |
| Â Â Â Â Â Â Â Â Â Number of bags per room (piece) | 32 | 64 | |||||||
| Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Total number of filter bags(piece) | 96 | 128 | 160 | 192 | Thick Plate Cutting Machine With the increasingly fierce competition in the market economy, more and more enterprises are beginning to realize how to improve efficiency, improve product quality, reduce costs and increase market competitiveness, which is an urgent problem to be solved in the current survival and development of enterprises. Reasonable and effective cost control has become the key to the survival and development of enterprises.
CNC cutting machine has the advantages of high degree of automation, easy operation, high efficiency, high precision, improved sheet utilization, material saving, and low labor cost, making CNC cutting machine one of the must-have equipments necessary for modern production and cutting.
Laser Metal Cutting Machine,Thick Sheet Plasma Cutting Machine,Thick Sheet Cutting Machine,Thick Plate Cutting Machine Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachines.com | ||||
