The hundreds of dollars of wireless bridges belong to civil-grade wireless bridges, and the wireless bridges produced by Shenzhen Lai’an Technology are industrial-grade and are transmitted over long distances outdoors. Both performance, stability, and cost-effectiveness are higher than civilian use. Level wireless bridge many times.
What are the differences between industrial-grade wireless bridges and civil-grade wireless bridges?
1. Industrial-grade wireless bridges are not much different from civil-level wireless bridges in terms of parameters, but in actual use, the difference will be obvious. The industrial-grade wireless bridge produced by Shenzhen Laien Technology is a high-end chip imported from abroad. However, in order to save costs, the civilian-class wireless bridge uses some cheap chips in China, so the difference in hardware is great. The civil level wireless bridge software is also copied some of the brand wireless bridge, so the stability is certainly not comparable to the original genuine wireless bridge, there are many loopholes.
2, due to the difference between hardware and software, resulting in wireless bridge transmission distance, bandwidth is also very different. Industrial-grade wireless bridges can transmit up to 100 kilometers while civilian-grade wireless bridges transmit up to 1 km. In the same environment, with a distance of 1km, the net bandwidth of the Shenzhen Lean Technology Wireless Bridge can reach about 110M, while the net bandwidth of the civil-grade wireless bridge can reach about 10M. Then, when transmitting video signals, why civil-class wireless bridges will be unstable in bad weather, because the bandwidth is not enough, the rain attenuation causes the signal to be weaker, and there is no way to guarantee the normal transmission of signals.
Due to the difference in bandwidth between industrial-grade wireless bridges and civil-grade wireless bridges, the transmitted signals must be differentiated. The design of civil-grade wireless bridges is designed to transmit network signals. Both hardware and software cannot meet the requirements of video transmission. In order to transmit video signals, it is recommended to use industrial-grade wireless bridge-professional video signal transmission equipment to ensure the stability of your signal transmission.
When you choose a wireless bridge, you must choose the equipment that suits your needs based on the signal you have transmitted and the transmission bandwidth. All electronic products are one-for-one price and one-for-one, and you are sure to have expensive reasons. So there is no best product, only the best one for your product. Specifically how to choose a wireless bridge, how to design wireless monitoring program, please call Shenzhen Leian technology business staff!
Single beam spunbond nonwoven production lines use polypropylene (PP) as raw material to make pp nonwoven fabric, adopting the technology of air drawing into webbing by negative pressure. The product of S nonwoven series is more suitable for packaging, waterproof material, packaging base lining and so on.
Advantages of Single Beam Spunbond Nonwoven Line:
1. Since S nonwoven series has one die, it is easier and faster to change the color of nonwoven fabric and there is not too much waste nonwoven fabric during the period of changing color.
2. Since S nonwoven series has one die, the land and space are less, the labor is less, and operation is easier.
Main Parameters of Single Beam Spunbond Non-woven Line:
|
Quantity of Die |
Spunbond Unit: 1 set |
|
Effective Width <mm> |
1600 |
|
2400 |
|
|
3200 |
|
|
GSM<g/㎡> |
9-200 |
|
Embossing Pattern |
Diamond |
|
Oval |
|
|
*Customizable |
Single Beam Spunbond Nonwoven Line Series
Spunbond Nonwoven Line,Single Beam Spunbond Nonwoven Line,S2400 Nonwoven Fabric Line,S3000 Nonwoven Fabric Line
Yangzhou Yuyang Nonwoven Machinery Co., Ltd , https://www.yynonwovenmachine.com