Smart Transmitter Operating Principle
The two pressures of the measured medium of the smart transmitter are passed into the high and low pressure chambers, acting on the isolation diaphragms of the delta element (ie, the sensitive element), and transmitted through the isolation diaphragm and the filling liquid in the delta element. Pretensioned measurement diaphragms on both sides. Measure the membrane and the electrodes on both sides of the insulator to form a capacitor. When there is no pressure or equal pressure on both sides, the diaphragm is measured at the middle position. The capacitances of the two capacitors on both sides are equal. When the pressures on both sides are inconsistent, the measurement diaphragm is displaced, and the displacement is proportional to the pressure difference. Therefore, the capacitances on both sides are not equal, and the oscillation and demodulation steps convert the pressure signal into a DC signal proportional to the pressure. After the A/D converter converts this DC signal into a digital signal and sends it to the microprocessor, the microprocessor sends the data to the D/A and HART communication circuits after linear fitting, damping, and other operations. The D/A converter converts a 4 to 20 mA analog signal from the microprocessor and the corrected digital signal and sends it to the output circuit. The EEPROM saves all configuration, characterization, and digital trimming data so that power is not lost. Pressure transmitters and absolute pressure transmitters work in the same way as differential pressure transmitters, except that the low pressure chamber pressure is atmospheric or vacuum.
Anhui Tiancai Cable Group Co., Ltd. is located in the scenic Tianchang City of Anhui Province. It is located in the historic city of Yangzhou in the east and Nanjing, the ancient capital of the Six Dynasties, in the south. It is a medium-sized enterprise specializing in the production of mining cables and instrumentation.
Needle roller punching machine series
The punching machine is a kind of mechanical equipment that is driven by the power mechanism after the raw material is installed, and the punching die acts on the material to complete the punching. The punching machine can perform operations such as sheet processing, stamping, molding, embossing, etc. that force metal into the mold.
The series of desiccant deoxidizer film perforating needle rollers developed by our company adopts imported alloy steel wire needles with high strength and good abrasion resistance, and advanced perforation technology. The processing accuracy reaches the same level in the world. The air permeability detection is uniform and stable.
This series of needle rollers are widely used for perforating various kinds of desiccant deoxidizer films for food, various kinds of micro-perforated or air-impermeable plastic packaging films, and medicinal packaging films. There are cold perforated needle rollers for direct perforation and heated perforated needle rollers.
Our company specializes in the supply of desiccant perforated needle rollers, deoxidizer film perforated needle rollers, wholesale of film perforated needle rollers, product quality and processing technology reliability, and stability are at the domestic advanced level, and can be produced according to customer requirements. Special specifications of needle roller, needle ring products. Welcome customers to consult.
Desiccant punching machine, deoxidizing film punching needle roller, plastic packaging film punching machine, cement woven bag punching machine, OPP film slotting roller punching machine, medical material precision punching machine
Changzhou Puyisen Machinery Technology Co., Ltd. , https://www.czsmmsmachine.com