In order to adapt to the development of aerospace high-tech and new models, and to meet the requirements of technological advancement of full and sufficient technology, a factory has intensified its technical reform efforts in recent years, especially for CNC equipment. In order to ensure that each new CNC equipment can exert its maximum performance, starting from the early management of numerical control equipment, the following four aspects are mainly done.
(1) The person in charge is responsible for the unified leadership of the factory to set up a technical reform leading group and set up a deputy chief engineer to be responsible for the technical transformation work. Strengthening the technical and economic argumentation, the project and decision-making of major technological transformation projects are discussed and approved by the technical reform leading group, so that all aspects can be checked to prevent undue losses caused by improper selection.
(2) The role of outstanding people in management is equipped with a relatively stable team with strong sense of responsibility, understanding of technology and management. From the introduction of equipment, including research, selection, data digestion, equipment pre-acceptance, installation and commissioning, process testing and equipment management after production, process pre-research, product development, daily maintenance and repair, etc., have a clear division of labor, the division of labor Responsibility system.
(3) Selecting the numerical control equipment from the maintenance point of view In the selection of equipment, the advancement, reliability and maintainability of the equipment should be considered. Advancedness refers to advanced equipment technology; reliability refers to the average time between failures of equipment and average failure rate, especially whether the control system passes the quality inspection of the national authority; maintainability refers to whether it is easy to repair, whether there is Good spare parts market supply, complete technical information of various repairs, whether there is good after-sales service, whether the maintenance technology capability is available, and whether the equipment performance price ratio is reasonable. Here, we must pay special attention to the integrity of the drawings, especially the backup system disk, PLC program software, system transmission parts, transmission means, operation passwords, etc., are indispensable. The equipment manufacturer's technical training for the user cannot go through the game. These must be noted and carefully implemented in the order contract, so as not to bring difficulties to future work. In addition, the same series of CNC systems should be selected as much as possible, which is beneficial to the management and maintenance of the equipment.
(4) Strengthening the installation, commissioning and acceptance of numerical control equipment In order to ensure the quality of new equipment, strict control measures have been formulated in the installation, commissioning and acceptance of equipment, in accordance with the contract, technical agreement, international and domestic standards and the acceptance criteria. The items are checked item by item. Acceptance includes: pre-acceptance at the factory; inspection of the outer packaging before the equipment is unpacked; inspection of the appearance and quantity of the parts after unpacking, various supporting materials, manuals, maintenance manuals, accessories manuals, system software and manuals, etc. Carefully check and keep it in a safe place, especially for system software. In this way, it will facilitate the development of additional functions of the equipment and the maintenance and repair of the machine tool in the future. After the machine tool is debugged, the RS232 interface is used to transmit the final parameters of the machine after adjustment, in case the machine parameters are lost and used as a backup. After installation and commissioning, the following items should be checked: geometric accuracy, positioning accuracy and repeat positioning accuracy, working accuracy, numerical control function, safety and noise, machining standard parts, machining parts of the buyer's designated products, machine cutting power, machine tool reliability, etc.
CNC equipment involves many technologies such as machine, electricity, liquid, gas, light, etc., with high technical content and difficult maintenance. Technical data is the basis for analyzing faults and is a prerequisite for solving problems. To this end, the management of CNC equipment technical data as an important part of the daily management of equipment, the main approach is: set up and complete. Due to the high precision and complicated structure of the imported production line equipment, the variety of spare parts has many specifications, and the equipment provided by the supplier has incomplete technical information, which increases the difficulty of setting the spare parts management. In order to provide cyanide, appropriate quantity, suitable quality, and cost-effective supply of spare parts, to ensure continuous and balanced production, we attach great importance to the introduction of spare parts management and domestic chemical production.
(Finish)
An electric mountain bike,also known as an e-MTB,is a type of mountain bike that is equipped with an electric motor and abattery.The electric motor provides assistance to the rider when pedaling,making it easier to climb hills and traverse rough terrain.EMTBs are designed to be rugged and durable with features such as full suspension,wide tires, and powerful brakes.They are also equipped with a range of electronic components,including a control unit that allows the rider to adjust the level of assistance provided by the motor.One of the main advantages of an e-MTB is that it allows riders to tackle more challenging terrain and cover greater distances than they would be able to on a traditional mountain bike. Thismakes makes it a popular choice for riders who want to explore new trails or push themselves to new limits.However, e-MTBs are also controversial, with some traditionalists arguing that they take away from the physical challenge and purity of mountain biking.Despite this, the popularity of e-MTBs continues to grow, with many riders embracing the technology and the new opportunities it provides.
Electric Mountain Bike,Ncm E Bikes,Giant Electric Mountain Bike
Ejoysport Technology (SuZhou)Co.,LTD , https://www.toperiding.com