Compared with other valve products, Q941F electric high pressure ball valve is a unique self-sealing design. The higher the pressure, the more reliable the seal. The valve seat is composed of a carbon fiber reinforced Teflon seal ring and a disc spring, so it is highly adaptable to changes in pressure and temperature, and does not produce any slippage within the marked pressure and temperature range. The sphere's machining process is detected by advanced computer detectors, so the processing accuracy of the sphere is high. Since the material of the valve body is the same as the material of the pipe, uneven stress does not occur, and no deformation occurs due to the vehicle passing through the ground, and the pipe is resistant to aging. The seal ring body adopts RPTFE material with 20% Carbon and guarantees no leakage (0%).
All parts of Q941F electric high pressure ball valve are forgings; inlaid valve seat, O-ring is installed behind the valve seat to ensure that the medium does not leak outside; this product adopts bottom-mounted valve stem to set back sealing structure to ensure that the packing is reliably sealed and Prevent the stem from coming out. Due to the special characteristics of its performance technology and working conditions, this product has formed a feature that cannot be replaced by other products.
In the lubrication system of the Q941F electric high-pressure ball valve, an oil filter device is installed. If the oil filter device is not maintained in the long-term use, the oil coarse filter is seriously contaminated with impurities, which will make the entire oil line unblocked. The main oil gallery will be short of oil, the engine will lose lubrication, and the friction surface will be burned due to no lubricating oil, especially the main bearings and connecting rod bearings. In this case, the bearing alloy will be lost due to the large amount of heat generated by the friction, and it will even sinter together with the journal and eventually stop the engine from working.
In order to avoid these undesirable phenomena, a bypass valve, ie, a safety valve, is provided in parallel with the rough filter in a section of the oil passage from the oil pump to the main oil passage. When the oil pressure difference between the oil inlet and outlet of the coarse filter exceeds the specified value, the bypass valve is pushed open, so that the oil flows directly into the main oil passage without passing through the coarse filter to ensure normal lubrication of various parts of the engine. Lubrication is the main factor at this time, and filtration is secondary. Although the engine oil entering the main oil gallery is not filtered and dirty, the engine will not suffer from dry friction due to lack of lubrication, causing serious problems.
All parts of Q941F electric high pressure ball valve are forgings; inlaid valve seat, O-ring is installed behind the valve seat to ensure that the medium does not leak outside; this product adopts bottom-mounted valve stem to set back sealing structure to ensure that the packing is reliably sealed and Prevent the stem from coming out. Due to the special characteristics of its performance technology and working conditions, this product has formed a feature that cannot be replaced by other products.
In the lubrication system of the Q941F electric high-pressure ball valve, an oil filter device is installed. If the oil filter device is not maintained in the long-term use, the oil coarse filter is seriously contaminated with impurities, which will make the entire oil line unblocked. The main oil gallery will be short of oil, the engine will lose lubrication, and the friction surface will be burned due to no lubricating oil, especially the main bearings and connecting rod bearings. In this case, the bearing alloy will be lost due to the large amount of heat generated by the friction, and it will even sinter together with the journal and eventually stop the engine from working.
In order to avoid these undesirable phenomena, a bypass valve, ie, a safety valve, is provided in parallel with the rough filter in a section of the oil passage from the oil pump to the main oil passage. When the oil pressure difference between the oil inlet and outlet of the coarse filter exceeds the specified value, the bypass valve is pushed open, so that the oil flows directly into the main oil passage without passing through the coarse filter to ensure normal lubrication of various parts of the engine. Lubrication is the main factor at this time, and filtration is secondary. Although the engine oil entering the main oil gallery is not filtered and dirty, the engine will not suffer from dry friction due to lack of lubrication, causing serious problems.
Anti-corrosion Spiral Steel Pipe
Anti-Corrosion Spiral Steel Pipe,Spiral Drain Pipe,Spiral Stainless Steel Pipe,Anti Corrosion For Steel
Tianjin Gongjiantiangang Steel Pipe Co., Ltd. , https://www.tjgjtggt.com