Cast Iron Hydraulic Control Valve

  • Model NO.: dn50-350
  • Od: Dn15-350
  • Painting: Epoxy Painting
  • Trademark: GHL
  • Specification: ASTM, ANSI. DIN, JIS
  • HS Code: 8481804090
  • Power: Hydraulic
  • Temperature: 10-120 Degree
  • Body: Cast Iron or Ductile Iron
  • Transport Package: Seaworthy Packing
  • Origin: Tianjin, China
Cast iron hydraulic control valve 

When the valve from the inlet water, the water flow through the valve into the main valve control room, when the solenoid pilot valve is opened, control room of the water by the solenoid pilot valve, ball valve outflow. The valve opening is greater than the needle valve opening, the main valve control room pressure is very low, the main valve in the fully open state.
 
When the solenoid valve is closed, the main valve control room of the water can not flow out, the control room to boost, and push the diaphragm off the main valve.
 
 
 
    Materials of  Water Flow Control Valve Parts: 
Name of parts Material of parts
Body & cap Ductile iron
Valve seat & valve disc Brass
Valve stem Stainless steel
Spring Stainless steel
               Surface EPOXY
Valve sealing EPDM/NBR
 


Cast Iron Hydraulic Control Valve
 
 
   Water Flow Control Valve Performance Specification:
Normal pressure (Mpa) Body test pressure
(Mpa)		 Sealing test pressure
(Mpa)		 Applicable medium Applicable temperature
(°C)
1.0 1.5 1.1 water  
0~80
1.6 2.4 1.76
2.5 3.75 2.75
 


 

CNC Machining

Cnc Machining,Cnc Lathe Machining Parts,Cnc Large-Scale Machining,Non-Standard Cnc Machining

Shenzhen Kairui Precision Technology Co., Ltd. , https://www.kailiseiko.com