LTD Serials General Electron Flowmeter (hereafter call flowmeter), is a precise flowmeter to measure the flow of liquid in the tube.
Feature
1.High Accuracy, Large Turndown RatioÂ
2.Anti-High Temperature and Erosion-proof
3.Anti-impurity 4.Well Interchange
5.Local instant flow and total flow LCD display, distant signal transmission;
6.Measurable medium: Water, waste water, low viscosity oil, etc.
Principle
When the liquid flows through the flowmeter, it pushes the wheel running. Within a certain flow range, the circling speed of wheel is direct proportional to the volume of the flow. When wheel running, the magnetic stainless slice of wheel will approach the loop of sensor and periodically change resistance of loop to result the emerge of impulse signal which is direct proportional with volume at the moment through the change of amount of loop's magnetism. This signal, after analyzed and amplified, will display instant and total flow separately.
Ambient Condition
Ambient Temp.:-20ºC~+55ºC
Relative humidity: ≤85%
Atmosphere pressure: 86KPa-106KPa
Technical information
1. Flow range table
Fluid Temp | -40ºC~+80ºC, 0ºC~+150ºC, 0ºC~+300ºC; |
Working pressure | 1.6, 2.5, 4.0, 6.3, 16, 25, 32, 42(MPa) |
Pressure Loss | For DN8~DN50 <0.01MPa;For DN80~DN300 <0.03MPa |
Anti-explosion Grade | ExdBT4 |
Output Signal | 4~20mA Current Output or RS485 |
Enclosure | IP65 |
Material | Cast steel for housing |
Application
Â
Spandex Warping Machine
Spandex warping machine also called spandex yarn warping machine; elastic yarn warping machine.
A-ZEN spandex warping machine AZE318 with vertical creel is driven by 5 sets high performance servo motors and adopted with advanced precisive laser to measure distance so that spandex warping is more stable, well equipped with and easier to operate. It is suitable for warping all kinds of spandex, especially for requirement of knitting high quality elastic textiles.
Technical Data:
Warp Line Speed: 100-600m/min;
Beam Size: Φ21"*21";
Warping ends: According to customers` demand;
Pre-drafting: 0-200%; Final Draft: 15-100%;
Brake time less than 0.6 s, the deviation of stop synchronization is less than 3%;
Creel Capacity: 616, 700, 728, 784, 792, 896, etc.
Servo Motor Power: Warper head power 13.2KW, Warper Head Tension Roller 2.9KW, Draft Roller 4.6KW, Creel: 2*6.9KW;
Main Motor: 10KW AC frequency conversion control;
Control Mode: Computerized real-time control, and user-friendly operation interface.
Spandex Warping Machine,Elastic,Beam Warping Machine, Yarn, Computerized Split Yarn Warping Machine
CHANGZHOU A-ZEN TEXTILE TECHNOLOGY CO.,LTD , https://www.tricotmachinery.com